Hoerbiger-Origa AZV-U5050/13 Twin Rod Pneumatic Cylinder, 50mm Bore 13" Stroke

Hoerbiger-Origa AZV-U5050/13 is a twin-rod pneumatic cylinder designed for precise, guided linear motion in industrial automation applications. Its dual piston rod configuration provides enhanced stability, resistance to rotation, and accurate positioning, making it suitable for handling loads that require alignment and rigidity over a long stroke. Manufacturer: Hoerbiger-Origa (Origa Division) Model: AZV-U5050/13 Product Type: Twin Rod Pneumatic Guided Cylinder Action Type: Double acting Cylinder Design: Twin rod, guided actuator Bore Size: 50 mm Stroke Length: 13 in (330.2 mm) Rod Configuration: Dual parallel piston rods for anti-rotation and increased load stability Guidance System: Integrated precision guidance with twin rods Mounting Style: Profile body with multiple mounting interfaces Operating Pressure Range: Typically 1 to 10 bar (0.1 to 1.0 MPa) Maximum Pressure: 10 bar (145 PSI) Proof Pressure: Approximately 15 bar Operating Medium: Clean, dry compressed air Cushioning: Adjustable pneumatic cushioning at both ends (typical for this series) Position Sensing: Prepared for magnetic proximity switches (slot on profile body) Port Size: Typically G 1/4 (for 50 mm bore, may vary by configuration) Port Location: End cap ports Speed Range: Approximately 50 to 1000 mm/s depending on load and conditions Ambient Temperature Range: -10°C to +80°C (non-freezing) Body Material: Anodized aluminum profile End Cap Material: Aluminum alloy Piston Rod Material: Hardened steel, chrome plated Guide Rod Material: High strength steel Sealing Material: NBR or polyurethane seals Load Capacity: Designed for higher side loads due to guided twin-rod construction Repeatability: High precision positioning due to anti-rotation design Lubrication: Pre-lubricated; additional lubrication optional Weight: Approx. 5–8 kg (estimated for 50 mm bore and stroke length) Corrosion Resistance: Standard industrial environment protection Application Areas: Automation, material handling, positioning systems, pick-and-place units Manufacturing Country: Germany or EU production facility (typical for Origa cylinders) Please review pictures carefully and let us know if you have any questions!