Nordson GP202-2PAAD2 Remote Metering Station

The Nordson GP202-2PAAD2 is a remote metering station designed to enhance adhesive application systems by providing precise metering and distribution. This system allows for multiple application delivery points without the need for additional melters, improving efficiency while maintaining adhesive consistency. Key Features: Expanded Delivery Capability: Enables additional adhesive application points by integrating a metering station between the melter and the application system. Consistent Adhesive Flow: Controls pressure fluctuations to prevent common issues like pattern inconsistency, burn-through on heat-sensitive substrates, and excessive add-on rates. Flexible Configuration: Supports one or two single- or dual-stream metering pumps with servo or AC drive options for customized flow control. Advanced Monitoring: Allows temperature and pressure monitoring through the melter control system or a dedicated auxiliary module. Scalable System: Can be linked with multiple stations to increase pumping capacity while minimizing adhesive degradation and maintenance. Specifications: Capacity: Supports two metering pumps/motors Pump Compatibility: Works with Nordson or Feinpruf single- and dual-stream pumps Pump Speed: Adjustable between 7 rpm to 100 rpm, with 45 rpm as the recommended speed Motor Options: Available with AC, AC with encoder, or servo motors Operating Temperature Range: 40°C to 230°C (100°F to 450°F) Adhesive Viscosity: Supports viscosities between 1,000 to 15,000 cps Input Pressure Range: 3.4 to 34 bar (50 to 500 psi), with an optimal range of 6.8 to 13.6 bar (100 to 200 psi) Pressure Relief Settings: Safety relief at 70 bar (1029 psi), with an additional safety valve engaging at 85 bar (1250 psi) Fitting Sizes: Inlet Hose: Available in 8, 13, or 16 mm Outlet Hose: Standardized at 8 mm Power Requirements: Operates on 240 VAC, consuming approximately 1200 W Heated Zones: 1 heated zone for consistent adhesive temperature control Temperature Sensors: Equipped with 100-ohm platinum RTD or 120-ohm nickel RTD sensors Physical Dimensions: 300 x 240 x 635 mm (11.81 x 9.45 x 25 in.), when configured with an AC motor

Condition: New

Weight:   6190.00

Depth:   19.00

Length:   26.00

Width:   25.00

SKU:   43739 4.R1.7.1